You are here: Home » Products » Common Mode Chokes » Through-Hole Ring Core Coil Filter Toroidal Common Mode Chokes Inductor with PCB Base

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Through-Hole Ring Core Coil Filter Toroidal Common Mode Chokes Inductor with PCB Base

Through-hole ring core Coil Filter Toroidal Common Mode Chokes inductor PCB Base For RFI Suppression
Through-hole Common Mode Choke coils is an inductor used to block higher-frequency while passing direct current (DC) and lower-frequencies of alternating current (AC) in an electrical circuit. A choke usually consists of a coil of insulated wire often wound on a magnetic core, although some consist of a doughnut-shaped "bead" of ferrite material strung on a wire.

The choke's impedance increases with frequency. Its low electrical resistance passes both AC and DC with little power loss, but its reactance limits the amount of AC passed.The above is about choke coils introduction
Toroidal Inductors are a highly economical choice.Efficient Design- Inductor designers can achieve shorter length of turn with smaller-sized Toroidal Inductors using less cooper wire and with no bobbin as with E-core designs.
Availability:
Quantity:
  • CMC

Through-hole ring core Coil Filter Toroidal Common Mode Chokes inductor PCB Base For RFI Suppression
Through-hole Common Mode Choke coils
is an inductor used to block higher-frequency while passing direct current (DC) and lower-frequencies of alternating current (AC) in an electrical circuit. A choke usually consists of a coil of insulated wire often wound on a magnetic core, although some consist of a doughnut-shaped "bead" of ferrite material strung on a wire.

The choke's impedance increases with frequency. Its low electrical resistance passes both AC and DC with little power loss, but its reactance limits the amount of AC passed.The above is about choke coils introduction
Toroidal Inductors are a highly economical choice.Efficient Design- Inductor designers can achieve shorter length of turn with smaller-sized Toroidal Inductors using less cooper wire and with no bobbin as with E-core designs.

Model
Inductance
(MH)
Rated Current (A)Dimension (mm)±2
ABCDWork Frequency
YST8*4*30.2mH-1mH0.1-2.5A12714510-100KHZ
YST9*5*30.8-3mH0.1-2.5A13715510-100KHZ
YST12*6*50.8-3.1mH0.1-2.5A14916610-100KHZ
YST14*9*51.5mH-4mH0.1-3A181020810-100KHZ
YST16*9*51.5mH-4.5mH0.1-3A201022810-100KHZ
YST18*10*81.8mH-5mH1-5A231325810-100KHZ
YST20*10*102.5mH-6mH1-5A2415261210-100KHZ
YST22*14*83mH-10mH1-5A2613281210-100KHZ
YST25*15*103.5mH-12mH3-15A3018321310-100KHZ
YST25*15*135mH-20mH5-25A3018321510-100KHZ
YST31*19*135mH-25mH5-40A3618381610-100KHZ
YST38*19*133mH-25mH5-40A4418461610-100KHZ
YST48*30*1510mH-30mH15-65A5420561810-100KHZ
YST50*30*2010mH-50mH20-100A6065352010-100KHZ
YST85*50*3015mH-70mH30-500A1001501203010-100KHZ


Previous: 
Next: